dmesg - AMD Athlon 64 X2 3800
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-35-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-35-generic root=/dev/mapper/lubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000beeeffff] usable
BIOS-e820: [mem 0x00000000beef0000-0x00000000beef2fff] ACPI NVS
BIOS-e820: [mem 0x00000000beef3000-0x00000000beefffff] ACPI data
BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: System manufacturer System Product Name/M2NPV-MX, BIOS ASUS M2NPV-MX ACPI BIOS Revision 0303 06/27/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xbeef0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00BF000000 mask FFFF000000 uncachable
3 base 00BEF00000 mask FFFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3056MB, range: 16MB, type UC
reg 3, base: 3055MB, range: 1MB, type UC
total RAM covered: 3055M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3055MB, range: 1MB, type UC
reg 3, base: 3056MB, range: 16MB, type UC
found SMP MP-table at [mem 0x000f5790-0x000f579f] mapped at [ffff8800000f5790]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xbec00000-0xbedfffff]
[mem 0xbec00000-0xbedfffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xbc000000-0xbebfffff]
[mem 0xbc000000-0xbebfffff] page 2M
init_memory_mapping: [mem 0x80000000-0xbbffffff]
[mem 0x80000000-0xbbffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7fffffff] page 2M
init_memory_mapping: [mem 0xbee00000-0xbeeeffff]
[mem 0xbee00000-0xbeeeffff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
RAMDISK: [mem 0x349b4000-0x364d1fff]
ACPI: RSDP 00000000000f7240 000014 (v00 Nvidia)
ACPI: RSDT 00000000beef3040 000034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 00000000beef30c0 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 00000000beef3180 007CAE (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 00000000beef0000 000040
ACPI: SSDT 00000000beefaf40 0001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: MCFG 00000000beefb180 00003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 00000000beefae80 00007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000beeeffff]
Initmem setup node 0 [mem 0x00000000-0xbeeeffff]
NODE_DATA [mem 0xbeeeb000-0xbeeeffff]
[ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bb400000-ffff8800be3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0xbeeeffff]
On node 0 totalpages: 781963
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 12156 pages used for memmap
DMA32 zone: 777968 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0xc0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8800bea00000 s86336 r8192 d24256 u1048576
pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 769722
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-35-generic root=/dev/mapper/lubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 52000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Memory: 3034072K/3127852K available (7372K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 93780K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
NR_IRQS:16640 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 2120.220 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4240.44 BogoMIPS (lpj=8480880)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bef00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28537 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... failed.
...trying to set up timer as ExtINT IRQ...
..... works.
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (fam: 0f, model: 4b, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8481.31 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbeef0000-0xbeef2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:23:04, date: 09/18/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [8000, ffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, efffffff]
node 0 link 0: mmio [f4000000, fe02ffff]
node 0 link 0: mmio [f0000000, f04fffff]
bus: [bus 00-04] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc0000000-0xf3ffffff]
bus: 00 [mem 0xf4000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
acpi PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
acpi PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
acpi PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-04]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf3ffffff]
pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfcffffffff]
pci 0000:00:00.0: [10de:02f0] type 00 class 0x050000
pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
pci 0000:00:02.0: [10de:02fc] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [10de:02fd] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [10de:02fb] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [10de:0240] type 00 class 0x030000
pci 0000:00:05.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:00:05.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:05.0: reg 0x1c: [mem 0xfb000000-0xfbffffff 64bit]
pci 0000:00:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
pci 0000:00:0a.1: reg 0x20: [io 0x4c00-0x4c3f]
pci 0000:00:0a.1: reg 0x24: [io 0x4c40-0x4c7f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.2: [10de:0272] type 00 class 0x050000
pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
pci 0000:00:0d.0: reg 0x20: [io 0xf400-0xf40f]
pci 0000:00:0e.0: [10de:0266] type 00 class 0x010485
pci 0000:00:0e.0: reg 0x10: [io 0x09f0-0x09f7]
pci 0000:00:0e.0: reg 0x14: [io 0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 0x18: [io 0x0970-0x0977]
pci 0000:00:0e.0: reg 0x1c: [io 0x0b70-0x0b73]
pci 0000:00:0e.0: reg 0x20: [io 0xe000-0xe00f]
pci 0000:00:0e.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:0f.0: [10de:0267] type 00 class 0x010185
pci 0000:00:0f.0: reg 0x10: [io 0x09e0-0x09e7]
pci 0000:00:0f.0: reg 0x14: [io 0x0be0-0x0be3]
pci 0000:00:0f.0: reg 0x18: [io 0x0960-0x0967]
pci 0000:00:0f.0: reg 0x1c: [io 0x0b60-0x0b63]
pci 0000:00:0f.0: reg 0x20: [io 0xcc00-0xcc0f]
pci 0000:00:0f.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
pci 0000:00:10.1: reg 0x10: [mem 0xfe024000-0xfe027fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
pci 0000:00:14.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:14.0: reg 0x14: [io 0xc800-0xc807]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:02.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:03.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 03]
pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:04:09.0: [8086:107c] type 00 class 0x020000
pci 0000:04:09.0: reg 0x10: [mem 0xfdbe0000-0xfdbfffff]
pci 0000:04:09.0: reg 0x14: [mem 0xfdbc0000-0xfdbdffff]
pci 0000:04:09.0: reg 0x18: [io 0x9c00-0x9c3f]
pci 0000:04:09.0: reg 0x30: [mem 0xfdba0000-0xfdbbffff pref]
pci 0000:04:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:10.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:10.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:10.0: bridge window [mem 0xfda00000-0xfdafffff pref]
pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0xc0000000-0xf3ffffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbeef0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x4000-0x407f] has been reserved
system 00:00: [io 0x4080-0x40ff] has been reserved
system 00:00: [io 0x4400-0x447f] has been reserved
system 00:00: [io 0x4480-0x44ff] has been reserved
system 00:00: [io 0x4800-0x487f] has been reserved
system 00:00: [io 0x4880-0x48ff] has been reserved
system 00:00: [io 0x2000-0x207f] has been reserved
system 00:00: [io 0x2080-0x20ff] has been reserved
system 00:00: [mem 0xbf000000-0xbfffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0290-0x0297] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x000dd000-0x000dffff] has been reserved
system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0a: [mem 0xbeef0000-0xbeefffff] could not be reserved
system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x00100000-0xbeeeffff] could not be reserved
system 00:0a: [mem 0xbef00000-0xbfefffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0a: [mem 0xfefff000-0xfeffffff] has been reserved
system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
Switched to clocksource acpi_pm
pci 0000:00:05.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:02.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:03.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 03]
pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 04]
pci 0000:00:10.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:10.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:10.0: bridge window [mem 0xfda00000-0xfdafffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0xc0000000-0xf3ffffff]
pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:01: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
pci_bus 0000:04: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 6 [mem 0xc0000000-0xf3ffffff]
pci_bus 0000:04: resource 7 [mem 0xf4000000-0xfcffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:05.0: Boot video device
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27768K (ffff8800349b4000 - ffff8800364d2000)
microcode: AMD CPU family 0xf not supported
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1411068184.967:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 5980
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.1: EHCI Host Controller
ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.1: debug port 1
ehci-pci 0000:00:0b.1: cache line size of 32 is not supported
ehci-pci 0000:00:0b.1: irq 22, io mem 0xfe02e000
ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:0b.0: OHCI PCI host controller
ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:0b.0: irq 23, io mem 0xfe02f000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:210:395
rtc_cmos 00:03: setting system clock to 2014-09-18 19:23:05 UTC (1411068185)
powernow-k8: fid 0xc (2000 MHz), vid 0xc
powernow-k8: fid 0xa (1800 MHz), vid 0xe
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[100]: starting version 204
[drm] Initialized drm 1.1.0 20060810
Floppy drive(s): fd0 is 1.44M
wmi: Mapper loaded
FDC 0 is a post-1991 82077
pata_amd 0000:00:0d.0: version 0.4.1
scsi0 : pata_amd
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 21
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20
checking generic (e0000000 130000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[drm] hdmi device not found 0 5 1
nouveau [ DEVICE][0000:00:05.0] BOOT0 : 0x04e000a2
nouveau [ DEVICE][0000:00:05.0] Chipset: C51 (NV4E)
nouveau [ DEVICE][0000:00:05.0] Family : NV40
nouveau [ VBIOS][0000:00:05.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:00:05.0] ... appears to be valid
nouveau [ VBIOS][0000:00:05.0] using image from PRAMIN
nouveau [ VBIOS][0000:00:05.0] BIT signature found
nouveau [ VBIOS][0000:00:05.0] version 05.51.22.33.07
nouveau 0000:00:05.0: irq 43 for MSI/MSI-X
nouveau [ PMC][0000:00:05.0] MSI interrupts enabled
nouveau [ PFB][0000:00:05.0] RAM type: stolen system memory
nouveau [ PFB][0000:00:05.0] RAM size: 16 MiB
nouveau [ PFB][0000:00:05.0] ZCOMP: 0 tags
ata2.00: ATAPI: _NEC DVD_RW ND-3500AG, 2.1B, max UDMA/33
ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13)
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.1B PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
e1000 0000:04:09.0 eth0: (PCI:33MHz:32-bit) 00:1b:21:bd:79:98
e1000 0000:04:09.0 eth0: Intel(R) PRO/1000 Network Connection
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
usb 2-3: new low-speed USB device number 2 using ohci-pci
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3160815AS 4.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg1 type 0
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-3: New USB device found, idVendor=045e, idProduct=0039
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Microsoft IntelliMouse\xffffffc2\xffffffae\xffffffae Optical
usb 2-3: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft IntelliMouse\xffffffc2\xffffffae\xffffffae Optical as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input5
hid-generic 0003:045E:0039.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse\xffffffc2\xffffffae\xffffffae Optical] on usb-0000:00:0b.0-3/input0
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 2-4: new low-speed USB device number 3 using ohci-pci
ata4.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3160815AS 4.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg3 type 0
sdc: unknown partition table
sd 4:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 2-4: New USB device found, idVendor=045e, idProduct=00db
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
usb 2-4: Manufacturer: Microsoft
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input6
microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:0b.0-4/input0
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.1/input/input7
microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:0b.0-4/input1
nouveau [ PTHERM][0000:00:05.0] FAN control: none / external
nouveau [ PTHERM][0000:00:05.0] fan management: automatic
nouveau [ PTHERM][0000:00:05.0] internal sensor: no
nouveau [ CLK][0000:00:05.0] 20: core 475 MHz shader 475 MHz
nouveau [ CLK][0000:00:05.0] --:
[TTM] Zone kernel: Available graphics memory: 1532354 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 13 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] TMDS table version 1.1
nouveau [ DRM] DCB version 3.0
nouveau [ DRM] DCB outp 00: 02000300 00000023
nouveau [ DRM] DCB outp 01: 03011312 00000000
nouveau [ DRM] DCB outp 02: 020023f1 0040c080
nouveau [ DRM] DCB conn 00: 0000
nouveau [ DRM] DCB conn 01: 0131
nouveau [ DRM] DCB conn 02: 0210
nouveau [ DRM] DCB conn 03: 0211
nouveau [ DRM] DCB conn 04: 0213
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 0xD186: Parsing digital output script table
nouveau [ DRM] MM: using M2MF for buffer copies
nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
ata6: SATA link down (SStatus 0 SControl 300)
nouveau [ DRM] allocated 1024x768 fb: 0x9000, bo ffff880035f53400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
nouveau 0000:00:05.0: fb0: nouveaufb frame buffer device
nouveau 0000:00:05.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:00:05.0 on minor 0
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
random: nonblocking pool is initialized
bio: create slab at 1
bio: create slab at 2
forcedeth 0000:00:14.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:17:31:7f:9f:40
forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
EXT4-fs (dm-4): INFO: recovery required on readonly filesystem
EXT4-fs (dm-4): write access will be enabled during recovery
EXT4-fs (dm-4): orphan cleanup on readonly fs
EXT4-fs (dm-4): 1 orphan inode deleted
EXT4-fs (dm-4): recovery complete
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
EXT4-fs (dm-4): re-mounted. Opts: errors=remount-ro
systemd-udevd[573]: starting version 204
EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
lp0: using parport0 (interrupt-driven).
i2c i2c-3: nForce2 SMBus adapter at 0x4c00
i2c i2c-4: nForce2 SMBus adapter at 0x4c40
nv_tco: NV TCO WatchDog Timer Driver v0.01
nv_tco: Watchdog reboot not detected
nv_tco: initialized (0x4440). heartbeat=30 sec (nowayout=0)
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
device-mapper: multipath: version 1.6.0 loaded
kvm: Nested Virtualization enabled
type=1400 audit(1411068207.884:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=699 comm="apparmor_parser"
type=1400 audit(1411068207.884:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=699 comm="apparmor_parser"
type=1400 audit(1411068207.884:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=699 comm="apparmor_parser"
type=1400 audit(1411068207.884:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=699 comm="apparmor_parser"
type=1400 audit(1411068207.884:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=699 comm="apparmor_parser"
type=1400 audit(1411068207.884:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=699 comm="apparmor_parser"
type=1400 audit(1411068207.888:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=697 comm="apparmor_parser"
type=1400 audit(1411068207.888:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=697 comm="apparmor_parser"
type=1400 audit(1411068207.888:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=697 comm="apparmor_parser"
type=1400 audit(1411068207.888:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=697 comm="apparmor_parser"
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
hda_intel: Disabling MSI
hda-intel 0000:00:10.1: Disabling 64bit DMA
hda-intel 0000:00:10.1: Enable delay in RIRB handling
init: failsafe main process (847) killed by TERM signal
systemd-udevd[606]: Error calling EVIOCSKEYCODE: Invalid argument
systemd-udevd[606]: Error calling EVIOCSKEYCODE: Invalid argument
systemd-udevd[615]: conflicting device node '/dev/mapper/nvidia_cbdifbfa2' found, link to '/dev/dm-2' will not be created
autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x25/0x0
inputs:
Rear Mic=0x1d
Front Mic=0x1f
Line=0x1c
CD=0x22
systemd-udevd[606]: conflicting device node '/dev/mapper/nvidia_cbdifbfa2' found, link to '/dev/dm-2' will not be created
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input12
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input8
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[606]: conflicting device node '/dev/mapper/nvidia_cbdifbfa5' found, link to '/dev/dm-3' will not be created
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1732) terminated with status 1